AVer NXU Lite User Manual
Page 109
101
(5) Remote Control Server
Enable/disable remote control from remote application (ex. CM3000). Enter the remote accessing port
in Port column. The default value is 5555.
i
User also can manually run this function. To run, click Start > Programs > DVR > Remote
Control Server. The
remote control server icon appears on the taskbar when the
remote control server is enabled. (also see
(6) PCViewer Configuration
Activate Enable Anonymous Login to remotely access the NVR server without the need of password
(8) Voice Phone
The Talk to Web-Client is to use the 2-Way Talk feature that allows the client and server to talk via
internet using microphone. Make sure both microphone and speakers work before using this feature. If
the Talk to Web-Client is disabled, the person in the NVR server side can only hear the voice from
the client side that is when the WebCam 2-Way Talk button is activated. (see also
).
i
Make sure that your Digital Signature is updated yearly; else you won’t be able to access
the NVR server from the PCViewer. To update/download your PCViewer Digital Signature,
click Update WebViewer Digital Signature. Make sure your PC is connected to internet.
(8) Network Time Synchronization
Adjust the NVR system time same as network time server. Fill in the Time Server IP address or
domain name. Select Automatic Synchronize time to set automatic synchronize time on a daily basis.
Or, user can click Synchronize Time Right Now to adjust time right away.
(9) Other Configuration
- Enable White List
An access permit list for the remote accessing of NVR server. Enter the IP address and click Add.
Or, enter a range of IP address and click Add. To delete the IP from the list, select the IP and click
Delete button. To reset the input, click Clear button.