AVer NXU Lite - Manual (Page 135)

127
3.10 User Setting
Users with Administrator privileges can access User Setting. The maximum user accounts are 256.
In the User Setting dialog box, click Add to insert a new user, Delete to remove the selected user, Edit
to modify the user control right, OK to exit and accept the setting, and Cancel to exit without saving
the setting.
After clicking Add or Edit, you may customize the user control setting. OK to exit and accept the
setting, and Cancel to exit without saving the setting
(1) Authorization level
Select the status of the user. Only Administrator-level can access User Setting, and reset the Alarm
status when using the Remote Console.
(2) Control Right
Enable the items that would allow the user to access.
(3) PCViewer
Enable/disable PCViewer control right that allow the user to operate from a remote location using
internet explorer.
- Remote Console
Allow the user to remote modify NVR system setting.
- Remote LogViewer
Allow the user to view the event log from remote site.
- Remote EMAP
Allow the user to view the Emap of NVR from remote site.