AVer NXU Lite - Manual (Page 132)

124
3.9.5 To Setup SMS/MMS Setting
To use this feature, GSM/GPRS modem is required. Connect the GSM/GPRS modem to the serial
COMM port of PC. Beside the SMS/MMS check box, click Detail.
i
MMS module is developed by ActiveXperts Software B.V.
1. Select the COM port number from ComPort drop down list which the GSM/GPRS modem is
connected. If your ISP requires the PIN code authorization, click Enter Pincode to enter the PIN
code which your ISP provided.
2. In Phone Num text box, enter the contact number.
3. You may now set to send thru SMS or MMS. If you enable SMS setting, just enter the message
in the text box. If you enable MMS, enter the APN name, WAP IP, MMS address and the
message. If you are not sure, please contact your mobile service provider.
4. Attach image when sensor is triggered: select the camera that the images will be capture and
send when the sensor is triggered.
5. Click OK to accept the new settings and Cancel to exit without saving.
i
Make sure your ISP provider and cell phone provider both support JPG file format
transmitting.