AVer NXU Lite User Manual
Page 73
Advertising
65
Map Network Drive: To add network storage, the Internet storage drive/folder must be
mapped as Network Driver in DVR server. Follow the below steps to map the network drive.
1. Click Map Network Drive button. In the Map Network Drive window, select the Drive and
fill in the IP address and file folder of file server or NAS on your network in Folder.
2. And then, click Finish to make the connection.
3. After connection successful, user should see the network drive on the Storage Path.
4. To disconnect the mapping network drive, click Disconnect Network Drive.
Ping IP: Allow user to ping and trace the certain IP address of network/server device on the
network.
Advertising