AVer NXU Lite - Manual (Page 158)

150
Network Setting
In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without
saving, and click Default to revert back to original factory setting. For the network service ports that
use by NVR server, please see
Appendix C .
(1) Server Name
Assign a name for the NVR unit. Letters of the alphabet and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make it
accessible via internet using WebCam, Remote Console, PDA Viewer and Hand Viewer (still image).
To select all the cameras, enable the ALL check box.
(3) Dynamic DNS (Domain Name System)
Use this service if the IP address changes each time when you connect to internet. Enter the Domain
Name and Password that user has registered, select the DDNS Server Name which the one that
user had registered the domain name, and enters the DDNS Server Port that is a service port for
connecting with the DDNS server.
To use this feature, please go to http://ddns.avers.com.tw or http://www.dyndns.com (see also
Appendix A ) to register your own domain name.
(4) Remote Control Server
Enable/disable remote control from remote application (ex. CMS). Enter the remote accessing port in
Port column.
(5) PCViewer Configuration
Activate Enable Anonymous Login to remotely access the NVR server without the need of password.
The default of WebCam port is 80.