AVer NXU Lite - Manual (Page 64)

56
Chapter 3 Customizing the NVR System
In the Preview/Advanced screen mode, click button to customize your NVR. When the NVR
configuration setup selection appears, select and click the buttons you want to change the setting.
3.1 System Setting
In the System Setting dialog box, click OK to accept the new settings, click Cancel to exit without
saving, and click Default to revert back to original factory setting.
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to record one hour
data, the system automatically replaces the oldest data. In case you have more than one storage path,
the system automatically saves the data to the next storage path. You may also add additional
network-attached storage (NAS) for extremely high storage capacity. Select the Enable network
storage check box to send the recorded video in network-attached storage. To add network storage,
the Internet storage drive/folder must be mapped as Network Driver in NVR server.