AVer NXU Lite - Manual (Page 2)

i
Manual Updates
Following are listed the new functions for the version 7.9.1.0033a and above of NXU surveillance
software.
[Note] User can press F1 to check NVR firmware version.
 New Functions
 Setup Wizard: A system setup wizard that will guide the user to setup the DVR system step
by step.
 Schedule by date: Allows user to setup recording schedule by date.

IPCam PnP: Allows user to connect AVer IP camera series without any configuration; just plug
and play.

Active IP: Allows user to configure AVer IP camera series on DVR system; the IP camera
patch must be v. 7.0.0.118 or above.

ONVIF PTZ: NVR system supports IP PTZ function on the IP camera that is connected
through ONVIF protocol. The IP camera patch version must be v. 7.0.0.123 or above.
 Function and OS supported table
OS
Function
Windows XP Windows 7
Setup Wizard N/A Yes
Schedule by date
Yes Yes
IPCam PnP
Yes Yes