AVer NXU Lite - Manual (Page 92)

84
3.2 Camera Setting
In the Camera Setting dialog box, click OK to accept the new settings, click Cancel to exit without
saving, and click Default1/ Default2 to revert back to original factory setting.
i
Only support for AVer IP camera series.
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the cameras, enable the
ALL check box. To select more than one camera, Right click on the camera icon. To select one
camera only, Left click on the camera icon. The camera icon turns red when it is selected. The
camera icon will be different that depends on the camera type user selected.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won’t detect it as video loss error.
(3) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can
still record the video and preview it in playback mode.
- Name
Change the camera name
- Description
Add a short comment
(4) IP Camera Information
Display the camera channel information
– Protocol, Model, IP/Port, Video Format, and Channel.