AVer NXU Lite - Manual (Page 153)

145
- Beep if no signal
Make sound when the video signal is lost.
- Mandatory Record
Always record video when software is running
- Enable Overlay
To enhance video signal for better video quality.
- Screen Saver
Set a period time to enter screen saver mode when system idle.
- Auto Scan Period
Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to
the next video in cycle depending on the set time gap.
- Playback Mode
Select the mode of playback the video.
 Select date and time: Select the date and time which user wants to playback.
 Play the last file: Automatically playback the video from the last hour
 Instant Playback: Automatically playback the video which has just recorded
- Date Format
Select the date format which wants to display in Select date and time playback mode
(6) Dual Monitor
To enable/disable dual monitor function.
(7) UPS (Uninterruptible Power Supply)
Protect the system from damaging, such as power surges or brownouts. This automatically gives time
to close the NVR properly when the battery backup power has reached the Shutdown when capacity
below percentage level setting.
The UPS device must be connected to your computer (refer to your UPS user’s guide).
i
The UPS application must meet Windows XP or Windows 7 system requirements.
(8) Firmware
User can upgrade the NVR system and IP camera patch from remote site. Please contact your local
dealer for newest NVR firmware and IP camera patch.
 Product Version: displays current NVR system firmware version. Click Update button to upgrade
the NVR firmware.