AVer NXU Lite - Manual (Page 125)

117
10. In (9) Priority, user can set the priority of this alarm. The priority of the alarm can be seen in CMS
site (Central Management System).
11. In (10) Action, you may now set the alarm action for the system to perform when the alarm
condition is activated.
- Launch Emap
Display mini Emap screen.
- Enlarge Camera View
Switch to only display video in Preview/Advanced mode from where the alarm is activated.
a. Select the camera from drop down list to specify which camera video to be enlarged on
screen when the alarm is triggered.
 Alarm Camera: when a channel has an alarm occurred, and then, the channel video
that has an alarm occurred will be enlarged on screen.

Camera # (1~32): the selected channel video that will be enlarged on screen when
an alarm is activated.
b. Select the display mode – 1 Channel or Full Screen.
c. Retrieve time: set the waiting duration before system switching back to original Preview
mode. If the retrieve time is un-mark, the alarm video will keep enlarging until user switch
back to Preview mode manually. The retrieve time range is 3~ 600 seconds.