6 changing the location of a material – Rice Lake CB-2 Concrete Batch Controller Version 2.0 User Manual
Page 70
66
Installation/Operation Manual
10.6 Changing the Location of a Material
Materials and their physical locations are defined under:
Admin Menu
Databases
Materials / Locations
Material Database:
Materials are identified by a material ID number and a name. Material type, material class, preacts and jogs are
defined for each material as well as other miscellaneous parameters. The material ID number is what is used to
identify the material in the “Ingredient” section of the mix design.
Location Database:
Locations are identified by a location number and name. The physical location of a material is defined here.
“Material” is a parameter located in the database. The material number entered here will be associated with the
delivery mode, digital outputs and setpoints structured to measure and discharge the required amount.
Concrete batching facilities may or may not have enough storage area for a material in one physical location. The
ability to modify the location of a material can make the creation of mix designs much easier. One material
number (name) can be used for all mixes by simply changing the physical location.