Rice Lake MSI-3460 Challenger 3 - Manual (Page 12)

8 MSI-3460 Operator’s Manual
1.5 Features
• Designed to meet or exceed all U.S. and international standards.
• Typically 50 hours of weighing time utilizing automatic sleep mode.
• Automatic power off conserves battery life by sensing no activity after 15, 30, 45
or 60 minutes, determined by operator, and turns off power.
• Automatic Sleep Mode preserves battery life by dimming the LED display after
5, 15, or 30 minutes of no activity.
• Rugged construction throughout. Buttons are sealed and rated for over one
million operations.
• Precise high resolution (2500 division standard and up to 10,000 possible) 24 bit
A/D conversion coupled with advanced RISC micro controller provides world
class features and accuracy.
• Five large, 1.5 inch (38 mm) LED digits for clear weight readings from a
distance.
• Easy to maintain: full digital calibration assures reliable, repeatable
measurements. Can be calibrated without test weights using MSI R-Cal
technology.
• Selectable for kg/lb unless prohibited by LFT regulations.
• Automatic or manual weight totalization for loading operations.
• Easily customized for special applications.
• Hi speed PEAK mode for wire and rope stress analysis.
• Three setpoints can be set for any in-range weight for operator alerts or process
control.
• ScaleCore technology provides quick and easy software updates and calibration/
setup backup.
• Two service counters ensure load train safety by warning the user to perform a
load train safety check when the lift count gets high or the scale has been
overloaded repeatedly.
1.6 Options
Options which you may have ordered with your Challenger 3 may include the
following:
• RF remote controller
• RF modem for connectivity to MSI-8000 RF Remote Display
• MSI-8000 RF Display
• 85-265 VAC input power.
• Audible alarm (triggered by setpoint 1)
1.7 Unpacking
When unpacking the scale from the shipping container, ensure that all assembly parts
are accounted for. Check the scale for any visible damage and immediately report any
damage to your shipper. It is advisable to use the original shipping container when
shipping or transporting the Challenger 3.