Rice Lake MSI-3460 Challenger 3 - Manual (Page 23)

Configuration 19
4.4 Sleep
The SLEEP feature reduces power consumption by automatically turning off the
display during periods of inactivity. When in the sleep mode, the red acknowledge
annunciator blinks at a one second rate. To wake up either a button must be pushed
(front panel or RF remote), or the weight must change by 5d or more.
1) With the 3460 off, press and hold
the
USER key, then press the
POWER key.
...or while the 3460 is on, press USER
and POWER simultaneously.
2) The first item of the Setup Menu
is Func1. Scroll to Sleep with
the
USER key.
3) To set up the sleep timing, press
TARE . The current Auto-Off time
is displayed.
4) Select the sleep start time by
scrolling through the choices with
the
USER key.
In this example, we’ll set 30 minutes as
the sleep start time.
5) When the desired time is
displayed, press
TARE . The next
item in the Setup Menu appears.
6) Either press ZERO to exit setup
and store all changes, or
continue to another Setup Menu
item using the
USER key.
Sleep Setup
)YQF

6W3W
Next Setup Menu Item
TARE
TARE
USER
F
POWER
Hold
USER
F
2II
blinking
USER
F

USER
F
ZERO
Store and return to
weight display

USER
F
blinking
blinking
blinking
6/((3
USER
F
6WRUH
Note
SLEEP must be set to less time than the Auto-Off timer. For example, set
SLEEP to five minutes and Auto-Off to 30 minutes.
Figure 4-4. Sleep Setup