Rice Lake MSI-3460 Challenger 3 - Manual (Page 55)

Appendix 51
8.2 Software Update for use with SC3 PCA
Equipment Requirements:
• PC with terminal program
• 3460 Interface Cable PN: 503230-0001 (10
') or -0002 (5')
Updating Process
1. Connect interface cable to P2, as shown.
Figure 8-1. Connecting Interface Cable
2. Power on the scale.
3. Open a terminal program.
Figure 8-2. Serial Port Setup
4. Configure to the following:
• Baud Rate: 38400
• Data Bits: 8
• Parity: None
• Stop Bits: 1
• Flow Control: XON/XOFF