Rice Lake MSI-3460 Challenger 3 - Manual (Page 27)

Configuration 23
4.7 Total Mode
The MSI-3460 can keep track of all weighments using the total feature. Either manual
total, which totals by pushing a configured USER key on the front panel or the RF
remote, or auto-total, which can be used to automatically add up each weighment. See
the total mode descriptions for details on the various total modes. To use manual total,
you must also program a user key. Auto total modes do not need a user key, but if a
user key is setup for total, then it will function as a total on / total off.
1) With the 3460 off, press and hold
the USER key, then press the
POWER key.
...or while the 3460 is on, press USER
and POWER simultaneously.
2) The first item of the Setup Menu
is Func1. Scroll to totaL with
the
USER key.
3) To setup the Total Mode, press
TARE . The current Total Mode
setting is displayed.
4) Select the Total Mode by scrolling
through the choices with the
USER key.
In this example, we’ll set the Total Mode
to the Auto-High mode. The Auto High
mode uses the highest stable reading
as the total value, and totals when the
load is removed.
5) When the desired Total Mode
setting is displayed, press TARE.
The next item in the Setup Menu
appears.
6) Either press ZERO to exit Setup
and store all changes, or
continue to another Setup Menu
item using the
USER Key.
Total Mode Setup
)YQF
$/RDG
)LOWU
Next Setup Menu Item
TARE
TARE
USER
F
POWER
Hold
USER
F
2))
blinking, Total Off
USER
F
$+L +
USER
F
ZERO
Cancel all setup
changes
$/$67
USER
F
Total on stable load
Total highest stable Load
Total last stable load
WRWD/
USER
F
WWO2Q
USER
F
Total with pushbutton
Store and return to
weight display
6WRUH
POWER