8 units, Units setup, Figure 4-8. units setup – Rice Lake MSI-3460 Challenger 3 User Manual
Page 28
24 MSI-3460 Operator’s Manual
4.8 Units
Units can be changed in two ways:
• Program a user function key to units
• Change the units with the setup menu with the following procedure
1) With the 3460 off, press and hold
the
USER
key, then press the
POWER
key.
...or while the 3460 is on, press
USER
and
POWER
simultaneously.
2) The first item of the setup menu
is Func1. Scroll to Unit with
the
USER
key.
3) To setup the weight units, press
TARE
. The display will blink
Unit.
4) Change the weight units by
pressing the
USER
key. The unit
is indicated by the annunciators.
5) When the desired unit setting is
annunciated, press
TARE
. The
next item in the setup Menu
appears.
6) Either press
ZERO
to exit setup
and store all changes, or
continue to another setup menu
item using the
USER
Key.
Units Setup
Next Setup Menu Item
TARE
TARE
USER
F
POWER
Hold
USER
F
Blinking
USER
F
ZERO
Cancel all setup
changes
USER
F
kg lb
Store and return to
weight display
Func 1
Unit
Unit
Func 1
S t o r E
POWER
Note
OIML LFT scales do not allow units to be changed.
Figure 4-8. Units Setup