3 auto- off, Yqf glvs, 6wruh – Rice Lake MSI-3460 Challenger 3 User Manual
Page 22: Auto-off setup, Figure 4-3. auto-off
18 MSI-3460 Operator’s Manual
4.3 Auto- Off
The Auto-Off feature, when enabled, prolongs the battery life of the scale by turning
POWER off when the scale is not in use. Any time a button is depressed (any button),
or the detected weight is in motion exceeding 5 or 10d, the time limit is reset.
Therefore, the scale will stay on indefinitely if the weight is changing or any button is
pressed at least once. With Auto-Off disabled, the scale will remain on; only pressing
POWER will turn it off (or if the battery is depleted).
1) With the 3460 off, press and hold
the
USER
key, then press the
POWER
key.
...or while the 3460 is on, press
USER
and
POWER
simultaneously.
2) The first item of the Setup Menu
is Func1. Scroll to “A-OFF” with
the
USER
key.
3) To set up the A-Off timing, press
TARE
. The current Auto-Off time
is displayed.
4) Select the Auto Off time by
scrolling through the choices with
the
USER
key.
In this example, we’ll set 60 minutes as
the Auto-Off time.
5) When the desired time is
displayed, press
TARE
. The next
item in the Setup Menu appears.
6) Either press
ZERO
to exit Setup
and store all changes, or
continue to another Setup Menu
item using the
USER
key.
Auto-Off Setup
)YQF
GLVS/
Next Setup Menu Item
TARE
TARE
USER
F
POWER
Hold
USER
F
2II
blinking
USER
F
USER
F
ZERO
Cancel all setup
changes
USER
F
USER
F
blinking
blinking
blinking
blinking
$2))
USER
F
Store and return to
weight display
6WRUH
POWER
Figure 4-3. Auto-Off