Rice Lake MSI-3460 Challenger 3 - Manual (Page 9)

Introduction 5
1.3 MSI3460 Annunciators
The MSI-3460 uses blue and red LEDs to indicate weight mode and other
information.
MOTION
Blue LED - Indicates that the weight has not settled within the motion
window (usually ±1d).

While this symbol is illuminated, the scale will not zero, tare or totalize.
0
Center-of-Zero – Blue LED - Indicates the weight is within 1/4d of zero.
PEAK Blue LED - Indicates the scale is in peak hold mode.
NET
Blue LED - Indicates the scale is in Net weight mode.

A tare weight is subtracted from the gross weight.
GROSS
Blue LED - Indicates the scale is in the Gross weight mode.

All hook weight is displayed minus any zero offset.
TOTAL
Blue LED - Indicates the scale is displaying the Total weight.

This is a temporary display lasting less than five seconds.
X1000
Blue LED - Usually used in conjunction with the TOTAL LED allows
accumulation of weight beyond the five digit display capacity.
LO BATT
Appears when approximately 10% of battery life remains and blinks
when automatic shutdown is imminent.
kg Red LED - Indicates weight display is in kilograms.
lb Red LED - Indicates weight display is in pounds.
SET POINTS
User programmable set points for early overload warnings.

Blue LED - Setpoint 1 and 2

Red LED - Setpoint 3
ACK
Acknowledge LEDs are used to provide feedback to the operator

Blue LED - Incoming remote commands have been received

Red LED - Light briefly once executed. Also used for acknowledging
successful Auto-Total operations.
RF
Blue LED - Indicates carrier detect for RF remote display equipped
MSI-3460 . If the LED is illuminated, MSI-3460 and remote display are
linked.

On units equipped with the RF remote control, the LED is illuminated
when a remote command is received and for the next half second.