Rice Lake MSI-3460 Challenger 3 - Manual (Page 13)

Introduction 9
1.8 Assembly
Battery
Cotter
Load
Hook Clevis
Clevis
Figure 1-2. MSI-3460 Assembly
1. Slide hook clevis over load cell with open end of hook toward front of scale.
2. Align holes of clevis and load cell.
3. Slide the clevis pin through the clevis and load cell holes.
4. Lock clevis pin in place with cotter pin. Bend cotter pin.
WARNING
Scale will be unsafe for use if clevis pin is not properly secured
with the cotter pin.
5. Slide battery pack into battery compartment. The battery will automatically
engage with its connectors.
6. Secure battery pack by turning the two locking fasteners on access door
clockwise 1/4 turn.
7. The scale is now ready for use.