Rice Lake MSI-3460 Challenger 3 - Manual (Page 48)

13) Press USER to change the Print
rate. Scroll the number with the
USER key. Enter each number
with the TARE key.
14) When the entire number is
displayed, press TARE again to
finalize the seconds entry. The
next Print Menu Item appears,
String.
15) Exit the Print Setup Menu by
pressing ZERO twice. The
message Store appears briefly
then normal system operation
starts.

blinking

blinking

fixed
6WUQ
3ULQW 6WRUH
USER
F
ZERO ZERO
TARE
TARE
USER
F
44 MSI-3460 Operator’s Manual
Figure 7-4. Printer Output Setup, Continued
7.4 802.15.4 RF Network Setup
(MSI-8000 Connection)
When equipped with the 802.15.4 option, the MSI-3460 can connect with an MSI-
8000 remote display or an 802.15.4 modem. The MSI-3460 uses three numbers to
connect to an 802.15.4 piconet:
1. ScaleCore ID - This number is used to uniquely identify each ScaleCore device
in a Piconet. It has a range of 0-254 and must not be duplicated within the same
RF channel. For the MSI-8000 as network coordinator, MSI recommends a
number for the MSI-3460 from 0-3 if multiple units will be connected to the
MSI-8000. If a single MSI-3460 is all that’s needed, then any number up to 254
is acceptable.
2. RF Channel - Establishes the base network that all interconnected devices must
match. This number must be in the range of 12-23.
3. Network ID - This is a 64 bit number that all interconnected devices must
match. The MSI-3460 limits this number to a max of 5 digits for a range of 0 -
99999. Do not use a small number here to help avoid other 802.15.4 networks
that default to a Network ID of 0.
For all devices that must interconnect, the RF channel and Network ID must match.
The ScaleCore ID must be unique. The MSI-3460 or other MSI RF equipment that is
a weight data source should be set to a ScaleCore ID of 0. Then if other slave devices
are added, they can be added in sequence.
3ULQW
U)
(WKQW
Serial Out Setup
rF Modem
Ethernet
RF MENU
2Q2II
6&LG
&KQO
QHWLG
RF On/Off
ScaleCore ID
RF Channel
Network ID
2Q
2II
RF On
RF Off
RF SETUP
Range 0-254
Range 12-23
Range 1 to 99999
Press Simultaneously
TARE USER
F
Figure 7-5. RF Menu