Rice Lake Secura - Quintix and Practum Series - User Manual - Manual (Page 18)

18
Using the Balance
User Manual for Secura, Quintix, Practum
Using the Balance
Switching the Balance On/Off (Standby)
0.00
Max 2100 g d=0.01 g
y The Leveling screen is displayed first after any model is switched on.
Level the balance if necessary.
– When the balance is switched on, the following message appears on the display:
Secura ® : Level The balance has been leveled.
Quintix ® and Practum ® : Level Please check leveling.
– If the balance needs to be leveled, a corresponding message appears on the
display (see “Leveling the Balance" on page 13).
– The balance must be regularly calibrated and adjusted to ensure correct
weighing results (see “Calibrating and Adjusting the Balance" on page 66).
– The display text is given in English as a default. The language can be changed
(see “Setting the Language" on page 19).
t
To switch the balance to standby mode, select the Menu key at the bottom left
of the display on the Weighing screen.
Components Statistics
Mixing Weighing
y The menu is displayed.
t
Select the j button in the Application menu.
y The balance switches to standby mode.
t
To switch the balance back on, select j on the display.
The balance starts in the application that was most recently used before it was
switched off.