Rice Lake Secura - Quintix and Practum Series - User Manual User Manual
Page 29
29
System Settings (Setup Menu)
User Manual for Secura, Quintix, Practum
Identifier
(Secura
®
only)
Identifier
Set device ID
Batch ID function
Sample ID function
Define identifiers for the printout via the
g
button and in the ISO/GLP printout
here. Under
Printout
in
Manual print
, the
ISO/GLP printout
option must be
activated.
Set device ID
menu option:
The device identification (ID) is printed in the header of the GLP printout.
t To activate the device ID, select
t
, enter the desired device ID, and confirm
with
l
.
Batch ID function
menu option:
The batch ID (L ID) is queried one time in the GLP printout.
t Activate this option to print out the batch ID.
Sample ID function
menu option:
The sample ID (S ID) can be printed by selecting the
g
button on the balance
display.
t Define settings for printing the sample ID.
–
On
: The sample ID is activated. This ID is queried before each printout.
–
Autom. decrement
: Select this option to automatically assign the sample
ID in ascending order.
–
Autom. decrement
: Select this option to automatically assign the sample
ID in descending order.
–
Off
: The sample ID is deactivated.
h
To enter and delete figures and values, e.g., for the sample ID, see “Enter figures on
the keypad" on page 21.