Counting – Rice Lake Secura - Quintix and Practum Series - User Manual User Manual
Page 63
63
Counting
User Manual for Secura, Quintix, Practum
Counting
Purpose: Use this application to determine the number of parts of approximately equal
weight. The weight of a counted reference sample is calculated and then the
objects with an unknown piece count are weighed. The balance displays the
number of parts and the piece weight.
Minimize counting errors:
– Ensure that the weight of individual parts is evenly distributed
– Larger reference piece counts lead to a higher degree of accuracy.
t
Select the Menu key in any application.
t
Select
the
Counting
symbol in the menu.
Max 2100 g
d=0.01 g
0.00
Reference
pcs
5
y The
Counting
application appears.
The piece count of the reference sample is displayed under
Reference
.
Reference
pcs
5
t
To set the thresholds, select the gray button.
Counting
Reference
Accuracy
5
10
20
Normal
10fold
y The
Counting
settings window appears.
t
Enter the reference piece count on the left.
Select a value or select
t
, enter the desired value, and confirm with
l
.
t
Select the accuracy of the weight value during counting on the right.
t
Select
l
to confirm.
t
Select
A
to zero the balance if necessary.
t
Place a container on the weighing pan.
t
Select
D
to tare.