Rice Lake Secura - Quintix and Practum Series - User Manual - Manual (Page 57)

57
Unstable Condition
User Manual for Secura, Quintix, Practum
Unstable Condition
Purpose: Use this application with moving samples (such as live animals) and for weighing
in unstable environments. A measurement cycle is automatically carried out with
a defined number of measurements for each object to be weighed. The individual
measurements are averaged, and this average is displayed as the result.
t Select the Menu key in any application.
t
Select the Unstable condition symbol in the menu.
Max 2100 g d=0.01 g
0.00
Measurements
5
y The Unstable condition application appears.
The set number of measurements is displayed under Measurements .
Measurements
5
t
To set the number of measurements and other settings, select the gray button.
Unstable condition
Measurements Start
5
10
20
Instability
Auto
Manual
y The Unstable condition settings window appears.
t
On the left, enter the number of measurements.
Select a value or select t , enter the desired value, and confirm with l .
t Select the degree of instability of movement in the middle (e.g., for the starting
criterion of the measurement).
t
On the right, choose whether the measurements are started manually
with Manual or automatically with Auto .
t Select l to confirm.
t
Select A to zero the balance if necessary.
t
To weigh a living animal, place a container or cage on the weighing pan.
t
Select D to tare.