Rice Lake Secura - Quintix and Practum Series - User Manual - Manual (Page 20)

20
Using the Balance
User Manual for Secura, Quintix, Practum
Operating Concept
This section describes the operational possibilities of your balance.
Operating and Display Elements on the Display
3 Sharp or pointed instruments (such as ballpoint pens) can damage the device.
– The touch screen should only be operated by lightly touching it with your
fingertips.
This can be done while wearing laboratory gloves.
Max 220 g d=0.0001 g
41.9765
Component
1
+
Net
LEVEL
G
SQmin 3.0500 g
1
2
3
4
5
6
7
8
9
13
12
10
11
1 Toolbar with currently available buttons:
Zero, Tare, and possibly Print (data output) and GLP printout
2 Metrology line (additional info for minimum capacity Min and the verification
scale interval e appear on verified balances)
3 Warning symbol for calculated values, negative gross values, or values that are
smaller than the minimum initial weight (SQmin)
4 Current measurement value
5 Set weight unit and display accuracy (see page 35)
6 Run application, such as saving the weight value of a component
7 Settings for the selected application
8 Menu key: switch to menu and functional selection
9 SQmin minimum weighing (Secura
® only; see page 37)
10 Bar graph: scaled measurement value display (percentage weighing capacity)
11 Preceding symbol (
) for weight value
12 Switch display value for application, such as net value, total value, weight
value, or calculated value
13 Field for status and warning displays