Rice Lake Secura - Quintix and Practum Series - User Manual User Manual
Page 84
84
Status Messages
User Manual for Secura, Quintix, Practum
Calibration/Adjustment
Error
Messages
“The balance needs to
perform eCheck!"
when eCheck is required.
“The balance needs to
be adjusted!"
when isoCAL is required.
“The balance
needs to be leveled!"
when leveling is required.
“Weight is too light!"
when a weight that is too light is placed on the
balance during external calibration.
“Weight is too heavy!"
when a weight that is too heavy is placed on the
balance during external calibration.
Leveling
Error
Messages
“Leveling"
The balance must be leveled (for balances with
electronic level indicators only).
Balance
Maintenance
Error
Messages
“Maintenance interval
ended"
when the maintenance date set by Service has been
exceeded.
Calibration Report Error Messages
“Calibration report data
not found."
“Not able to save cal./adj.
data."
“Cal./adj. log file could
not be opened."
“USB
Devices”
Error
Message
“The attached USB device is
not supported."