Individual identifiers (secura® only), Individual identifiers (secura, Only) – Rice Lake Secura - Quintix and Practum Series - User Manual User Manual
Page 38
38
Weighing
User Manual for Secura, Quintix, Practum
Individual Identifiers (Secura
®
only)
Purpose: You can define identifiers for the following print jobs:
– Device identification (ID): printed in header of GLP printout.
– Batch ID (L ID): queried after each GLP head in GLP printout.
– Sample ID (S ID): for printouts via the
g
button. This ID is queried before each
printout.
Prerequisites: – The balance must be connected to a Sartorius lab printer or PC for printouts
(see “USB Port" on page 72).
– The settings for individual identifiers can be configured in the system settings
under
Identifier
(see “Identifier (Secura
®
only)" on page 29).
– The GLP printout can be activated in the system settings under
Print function
in
Manual print
(see “Printout" on page 28).
Starting
the
Printout
Example: Configuration of system settings for printing sample ID (S ID):
Identifier
–
Sample ID function
–
Autom. increment
:
t Place the sample on the weighing pan.
14.42
Max 2100 g
d=0.01 g
+
t Select
g
to print.
1
S ID
1
2
3
4
5
6
7
8
9
-
0
.
C
y The identifier for the printout is displayed.
The displayed value can be changed if desired.
– Delete the displayed value: Select
u
.
– Delete the last character: Select
k
.
t Select
l
to confirm.
y The weight value is printed. A sample printout can be seen below:
------------------
S ID
11
N
+
200.21 g
S ID
12
N
+
200.19 g