Bradford White BLMC125NA - Manual (Page 5)

Page 3 The Brute Elite 125
4.
TWO
MORE
SCREWS
1.
LOOSEN
THESE TWO
SCREWS
2. FOLD
BOTTOM
PANEL
DOWNWARD
3.
FOLD
CENTER
PANEL
DOWNWARD
START UP / SHUT DOWN
INSTRUCTION (DECAL)
IS ON THE BACK OF THE
TOP COVER
RATING PLATE
USER INTERFACE
Figure 1A. Opening the Brute Elite to locate the Rating Plate and Start Up / Shut Down Instruction (Decal)
5. THE TOP
PANEL THEN
SLIDES
UPWARD
AND OFF
To open the Brute Elite, first loosen the two
phillips screws and then open the front bottom panel
downward. The center front panel will then also open
downward. Then loosen the 2 phillips screws and slide
the top panel upward and off. You will find the Start Up
/ Shut Down Instruction (Decal) on the back of the Top
Panel.
NOTE: For the complete Start up and Shut down
instructions for the Brute Elite, please reference
SECTION 10 of this manual.
NOTE: To operate the Brute Elite
using the USER INTERFACE, please reference
SECTION 8 of this manual.
1.6 Warranty
Bradford White Corp.’ Brute Elite appliances
are covered by a limited warranty. The owner
should complete the warranty registration at www.
BradfordWhite.com.
All warranty claims must be made to an
authorized Bradford White Corp. representative.
Claims must include the serial number and model
(this information can be found on the rating plate),
installation date, and name of the installer. Shipping
costs are not included in the warranty coverage.
Some accessory items may be shipped in
separate packages. Verify receipt of all packages listed
on the packing slip. Inspect everything for damage
immediately upon delivery, and advise the carrier of
any shortages or damage. Any such claims should be
filed with the carrier. The carrier, not the shipper,
is responsible for shortages and damage to the
shipment whether visible or concealed.
1.5 Unpacking
The Brute Elite is shipped in a single crate with
the following standard components packed with the
appliance ( see Figure 2 ):
2" PVC Terminal Kit (tee, elbow, screens, PRV
adapter and 30psi PRV flow restrictor), wall
mounting bracket (bolts/mounting hardware
provided by installer).
1. Remove all packing and tie-down materials.
2. Check contents of the carton against items shown.