Bradford White BLMC125NA - Manual (Page 9)

Page 7 The Brute Elite 125
Figure 4. Locating the Appliance.
Figure 5. Mounting Detail.
Figure 6. Wall Template (not to scale). Full-size template is
included with the unit.
Zero clearance is allowed to combustible surfaces.
However, the above minimum service clearances are
strongly recommended.
Closet installations require minimum air ventilation
(see Section 3).
Note: Brute Elite
bracket and wall
bracket are
purposely offset.
Brute Elite
NOTE: Brute Elite models include 16" on-center
mounting holes on upper rear of boiler jacket. These
holes are not identified on the mounting template. If
mounting conditions are appropriate, the installer may
opt to use this alternative method in lieu of the standard
wall bracket depicted. Installer must provide appropriate
mounting/anchoring hardware.
(Minimum)
Brute Elite
BLMC/H125