4 function description, 1 introduction, 2 block diagram – Pilz PNOZ s30 24-240VACDC 2 n/o 2 n/c User Manual
Page 13: Section 4, Function description, Introduction, Block diagram
Function description
Operating Manual PNOZ s30
1001715-EN-13
13
Function description
Introduction
Proximity switches or rotary encoders record measured values, which are evaluated in the
speed monitor
PNOZ s30. There are 9 monitoring functions (F1 ... F9), which are per-
formed simultaneously.
Up to 16 different parameter sets (P0 ... P15) for the monitoring functions can be selected
via the select inputs.
Configuration of the monitoring functions is menu-driven, using a rotary knob. The outputs
switch depending on the configuration.
An interface is available to connect a contact expansion module PNOZsigma, enabling the
number of outputs to be expanded.
The relay conforms to the following safety criteria:
}
The circuit is redundant with built-in self-monitoring.
}
The safety function remains effective in the case of a component failure.
Block diagram
A1 A2
Y10 Y11 Y12 Y13 Y30 Y31
Power
Reset/
Start
S34
=
~
Rel. 1
13 11
12
14
23
24
21
22
Feed-
back
Y32 Y33 Y34 Y35
Initiator
Input
In1 In2 GND
24 V 0 V
S11 S21
Inputs (SEL)
Select
Interface
Extended Relais
24 V ext
0 V ext
X6
RJ45
Y1 Y2
Rel. 2
Relay
Control
4
4.1
4.2