1 create configuration overview, 2 operate rotary knob, Create configuration overview – Pilz PNOZ s30 24-240VACDC 2 n/o 2 n/c User Manual
Page 39: Operate rotary knob
Advertising
Commissioning
Operating Manual PNOZ s30
1001715-EN-13
39
Create configuration overview
For a better overview, before entering the configuration values we recommend that they are
entered in the attached form PNOZ_s30_Config_Overview:
Operate rotary knob
The rotary knob:
}
(A) should be pulled out until it clicks into position
}
(B) then released and retracted back into the unit:
– Press the latch on the side of the rotary knob (1) towards the centre of the knob.
This releases the rotary knob.
– Press the knob downwards (2) while keeping the latch held down.
6.2.1
6.2.2
Advertising
This manual is related to the following products: