2 configuration overview – Pilz PNOZ s30 24-240VACDC 2 n/o 2 n/c User Manual
Page 85
Advertising
Supplementary data
Operating Manual PNOZ s30
1001715-EN-13
85
}
Standstill monitoring:
Standstill is detected at <= 2 Hz for both operating modes and the output Rel. 1 switch-
es on.
}
Feedback loop monitoring via feedback inputs Y1 and Y2
Encoder:
The measured values are detected by an incremental encoder (sin/cos)
Configuration overview
9.3.2.2
Advertising
This manual is related to the following products: