Panasonic Panafax UF-260 - Manual (Page 103)

12
PROBLEM SOLVING AND DAILY
CARE
Information Code
When something unusual occurs, the display may show one of the information codes
below. These will help you fix the problem.
Information
code
Meaning Response
001
002
004
Recording paper jam. Remove jammed paper.
(See page 102)
010 No recording paper. See page 103.
030 Document is not set
properly. Reset the document
correctly.
031 Document is jammed or
document length exceeds
one meter.
Open the transmitting guide
unit and remove the
document. Then reset the
document (see page 104).
060 Receiver Ck>ver Unit and
Bottom Board Unit opened
during communication.
Close the Receiver Cover
Unit and Bottom Board Unit.
40010 599 Communication trouble due
to:
• varying telephone line
conditions
• fax machine
incompatibility
• problem at other party.
• Reset the document and
try again.
• Check the other party.
621 Unable to dial and poll
because of no recording
paper. See page 103.
623 No document was on the
ADF when transmission
started after automatic
dialing operation.
Place documents face down
on the ADF.
630
633 Redialing was not
successful because of a
busy line or no response.
Redial manually.
638 Power failure occurred. Try the same operation
again.
870 Memory overflow. When substitute reception,
reload recording paper.
12
101