Verification stamp – Panasonic Panafax UF-260 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Verification Stamp
The verification stamp helps you to confirm successful transmissions by stamping
the bottom of each successfully transmitted page with a small pink mark. Your
machine is preset to STAMP = ON. To set the Verification Stamp to OFF,
1
STAMP
DOCMENT SET
STAMP=ON
4
DOCUMENT SET
STAMP
• II
11
STAMP=OFF
To return to STAMP = ON, press
STAMP I again.
You can now dial by pressing itEL/DiALl
and a full number, a One-Touch key,
ABBRI and two digits, or I REDIAL I.
NOT€
1. After changing the Stamp setting, you can
a) return to standby with I STOP |.
b) start a different series of settings by pressing I RESOLUTION I, [ORIGINAL |,
HALF TONE], MODE E][±], or [FUNCTIOjiF
2. To change the preset Stamp position, see page 27.
3. When you use memory transmission, Verification Stamp will not function. If you wish
the Verification Stamp to operate during memory transmission, see Setting Fax
Parameters (page 27).
37