Sending a document by relayed transmission – Panasonic Panafax UF-260 User Manual
Page 128
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending a Document by Relayed Transmission
Once you have recorded all the necessary parameters in your machine in accordance
with the Relay Network you belong to, you can send a document to two or more
stations in the network system, automatically, using the procedure below. The
operation is the same as Multistation Transmission.
1
2
126
Place documents face down on the ADF.
Adjust the left and right Document
Guides.
Document Guide
Dial by pressing a Program key or
MEMOBY/MULTIFILE
I , and any
combination of One-Touch, I ABBRland
two digits, ITEL/
d
I
al
I and a full number,
and a program keys.
Ex: nr] and [27]
START
__
^ J
First the machine stores the document
into the memory. Then it dials the Relay
Station and sends the document.
After
the
transmission
ends,
your
machine prints out a RELAY XMT
REPORT automatically and returns to
standby.
After the Relay Station finishes its
transmission
to
the
end
receiving
stations, your machine prints out a
RELAY XMT RESULT report sent back
by the Relay Station and returns to
standby.
DOCUMENT SET
ENTER STATION(S)
DOCUMENT SET
[PI 1 ( P r o g r a m name)
DOCUMENT SET
[ 2 7 ] ( S t a t i o n name)
* STORE *
N0.001
PAGES^OI 01%
*
STORE
*
COMPLETED
TOTAL PAGES=05
* DIALING *
[ 0 1 ] ( S t a t i o n name)
* JOURNAL PRINT *