Panasonic Panafax UF-260 - Manual (Page 69)

How to Poll
The following procedure lets you poll one station, or up to 100 stations. However,
if you want to poll two or more stations, you must use One-Touch dialing or Abbreviated
dialing numbers. Multistation polling does not require a Relay Station. Be sure to
set the poliing password before polling (see page 65).
1
2
FUNCTION
and
Dial by pressing a One-Touch key,
ABBR and two digits, or TEL/DIAL
and a full number.
Ex: lABBRl and [3][5], or
TELyDIALir7]f7l[y]f2
HSH]
To add more stations, use One-Touch
keys, or ABBR I and two digits.
Ex: One-Touch key [Ts
POLLING
ENTER STATION(S)
POLLING
( 3 5 ) ( S t a t i on name)
or
POLLING
7772345|
POLLING
[ 1 5 ] ( S t a t i on name)
* DIALING *
[ 1 5 ] ( S t a t i o n name)
NOT€
1. To erase or change stations set in Steps 2 or 3, press 1 CLEAR 1. If you recorded
several, use MODE or to find the station you want. Then press
CLEAR I. Add new stations with One-Touch keys, or
\
ABBR
\
and two digits.
2. If a polled station is busy, or does not answer, it will be skipped and the next station
will be polled. The skipped station(s) will be redialed up to twice after all registered
stations have been polled.
3. When polling ends, a Multistation Communication Journal is automatically printed out.
This journal lists the stations polled and indicates whether polling was succ^sful or not.
67