Panasonic Panafax UF-260 - Manual (Page 93)

Journal Printout Explanation
( 1 )
( 2 )
(3)
Printout date
Printout time
Communication number
(4) Communication result
(5) Number of pages
transmitted or received
(6) Duration of communication
(7) Type of communication
(8) Remote station identification
(9) Communication date
(10) Communication start time
(11) Diagnostic
(12) LOGO
(13) ID number
(14) Dialing method
(15) Call back message
Day-Month-Year
HourMinute
1 ~ 32 (Does not always begin with 1
when printed out manually.)
“OK" indicates that the transmission was
successful.
"S-OK" indicates that STOP was pressed
during communication,
Three-digit information code (see page
101) appears when there was a problem.
The two digit number is the number of
pages successfully transmitted or
received. When the Total Page function is
activated, two two-digit numbers will
appear. The first two-digit number
represents the number of pages
successfully transmitted. The second two-
digit number represents the total number
of pages that were attempted to be
transmitted.
An asterisk indicates that the quality
of some received copies was poor.
Hours ; Minutes : Seconds
"XMT" means Transmission
"RCV" means Reception
A name indicates station name recorded
in this machine. A number indicates
remote station's ID number or Telephone
number. Group 2, 3 indicates that the
remote station was a CCtTT G2, G3
machine.
Day-Month
HounMinute
For service personnel only
"T" indicates direct dialing or
One-Touch/Abbreviated dialing with no
recorded station name.
Appears when voice contact was
requested.
11
91