Panasonic Panafax UF-260 - Manual (Page 36)

BASIC TRANSMISSION SETTINGS
You can temporarily change seven basic settings (Resolution, Contrast, Halftone,
Total Pages, Verification Stamp, Individual Transmission Journal and Error Correction
Mode) before any ordinary transmission. These settings can be altered before or after
you place documents on the ADF. After you finish transmission, your machine will
automatically return to the preset settings. You can also change these settings during
transmission.
Resolution
Your machine is preset to Standard resolution, which is suitable for ordinary
documents. Use FINE or Super-FINE for very detailed documents.
1
2
RESOLUTION
DOCUMENT SET
RESOLUT I O N = S T D
(STD = Standard)
RESOLUTION
DOCUMENT SET
RESOLUT I O N = F I N E
satisfied, go to Step 4.
DOCUMENT SET
RESOLUTION
R E S O L U T I O N ' S F I N E
4
To return to Standard, press
RESOLUTION again.
You can now dial by pressing
TEL/DIAL] and a full number,
a One-Touch key, IABBRI and two
digits, or REDIAL
NOT€
1. After changing the Resolution setting, you can
a) go to standby with [ STOP I.
b) make a copy of the document to test the new Contrast setting by pressing | COPY
c) start a different series of settings by pressing | RESOLUTION |, I HALF TONE
I
STAMP I, MODE
[E]C±]
»
or
I FUNCTION
2. To change the preset Resolution position, see page 27.
34