Setting program keys, Programmed communication, Ex:fptl – Panasonic Panafax UF-260 User Manual
Page 79
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10
PROGRAMMED COMMUNICATION
Setting Program Keys
Your UF-260 fax machine has eight Special Program Keys. These keys are useful
if you frequently need to send or poll the same group of numbers. You can use these
keys to store a sequence of stations to be polled, a deferred transmission or polling
sequence, or an additional One-Touch Key (One-Touch Group Key).
To set a number or a group of numbers in a Program key, follow the procedure below.
10
and
MODE
c~^r^r-)
repeatedly.
Press one of the Program Keys,
[Hltogr
Ex:fPTl
NO. =1
1:XMT/POL
[PI J
2;ABBR/GRP
Now you can choose one Program Key mode out of the following four modes.
• Deferred Transmission
• Polling
• Deferred Polling
• Group Dialing
Go to step 5a.
Go to step 5b.
Go to step 5c.
Go to step 5d.
NOT€
XMT/POL means Transmission or Polling. ABBR/GRP means Group dialing,
77