Panasonic Panafax UF-260 - Manual (Page 147)

: ■
0 г-
и
Ш.
How to Use the Machine after You Set Fax Access Code
1
2
Enter Fax Access Code.
Ex: [5][5]Ell]
If the Fax Access Code you just entered
coincides with the code set in the
machine, the display “AC = ” will
disappear. If not, the machine returns to
standby.
Now you can use the machine by normal
operation.
Ex: Set a document on the ADF.
After you complete any operation, the
machine will return to standby. To use the
machine again, reenter the Fax Access
Code.
NOT€
When you enter the Fax Access Code in Step 1, the numbers are not displayed.
145
13