Setting/replacing recording paper – Panasonic Panafax UF-260 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting/Replacing Recording Paper
1, Press the latch button on the right side of the cover and open the Receiving Unit.
Remove the Head Protective Sheet.
Receiving Unit
Head Protective Sheet
Latch Button
2.
Set the recording paper into the unit and feed the leading edge of the paper
between the guide plates of the cutter unit until it projects out of the unit. Make
sure that the recording paper is set correctly as shown in the figure below. If it
is set incorrectly, the machine will not reproduce images.
2. If the recording paper cannot pass between the guide plates, turn the Cam Wheel
as far as you can in the arrow direction.
15