Clearing a recording paper jam – Panasonic Panafax UF-260 User Manual
Page 104
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Clearing a Recording Paper Jam
If the recording paper becomes jammed in the machine, the display will show the
information code 001 or 002. To clear the jam, open the Receiving Unit and remove
the jammed recording paper as shown in the figure below. Then reset the recording
paper following the loading procedure on page 103.
If you cannot remove the jammed recording paper smoothly, turn the Blue Cam Wheel
in the arrow direction until it stops. Then remove the paper as shown the figure below.
Cutter Unit
Recording Paper Width Marks (v)
102
Advertising