ClearOne comm CONVERGE SR 1212 - Manual (Page 129)

124
Post-Gain meter
the Post Gain level meter displays the post-gain signal level in dB.
Limiter
the Limiter limits the output level to the telco side to comply with telco system requirements. note that the meter is
only a graphic; it does not show limiter activity.
Output Level meter
shows the signal level in dB when a signal is present.
Channel Routing matrix: Telco Tx
the graphic below shows the telco tx channel routing matrix.
all inputs from Exp. O, and from Exp. S are selected as cross points and the first four inputs are gated by default.
Clicking a cross point box selects it, clicking it a second time sets the cross point, as indicated by a colored box.
the dB level for set cross points is shown numerically in the box.
to adjust cross point gain/attenuation, right-click on a cross point box and select Cross Point from the shortcut
menu.