ClearOne comm CONVERGE SR 1212 - Manual (Page 244)

239
ENETGATE – Ethernet Default Gateway Address
this command selects/reports the default gateway of the ethernet port on the unit.
Command Form : DEVICE ENETGATE [value]
Argument Type Size Values units
value Ip address 4 (null to query in text)
ENETSuBN – Ethernet Subnet Mask
this command selects/reports the subnet mask of the ethernet port on the unit.
Command Form : DEVICE ENETSuBN [value]
Argument Type Size Values units
value Ip address 4 (null to query in text)
EREF – Expansion Bus Reference
this command selects an output or reports which output is the expansion bus reference.
Command Form : DEVICE EREF <Channel> [value Channel value group]
Argument Type Size Values units
Channel Channel 1 see reference Channels in Groups and Channels
group group 1 8 (a, e)
value Channel 1 0 = none
see 2, 20 (o, B) in Groups and Channels
(null to query in text)
value group 1 0 for none or 2, 20 (n for none or o, B)
EVENT – Run Scheduled Event
this command manually runs a scheduled event on a unit. There is no query associated with this command.
Command Form : DEVICE EVENT <Channel> <group>
Argument Type Size Values units
Channel Channel 1 1 - 10
group group 1 21 (q)
reserved unsigned short 2 0
FE – Feedback Elimination Enable
this command enables or disables feedback elimination on the power amplifier channel.
Command Form : DEVICE FE <Channel> <group> [value]
Argument Type Size Values units
Channel Channel 1 see groupandChannels
group group 1 23 (J)
value unsigned short 2 0 = on
1 = off
2 = toggle
(null to query in text)
FEB – Feedback Elimination Bandwidth
this command sets the filter bandwidth of the notch filter. options are a q = 5 or q = 10
Command Form : DEVICE FEB <Channel> <group> [value]
Argument Type Size Values units
Channel Channel 1 see groupandChannels
group group 1 23 (J)