ClearOne comm CONVERGE SR 1212 - Manual (Page 278)

273
Argument Type Size Values units
value hexadecimal 4 (sent with a null, value returned in text)
VER - Version
this command reports the version of the unit. This command is read only.
Command Form : DEVICE VER [value]
Argument Type Size Values units
value string 8 version of format mm.mm.rr
(sent with a null in text, value returned)
xCGROuP – Compressor Group
this command sets the compressor group for synchronized operation of the compressor. this command can be
used to replace the Cgroup command for the p group.
Command Form : DEVICE xCGROuP <Channel> <group> [value]
Argument Type Size Values units
Channel Channel 1 see groups and Channels
group group 1 5, 23 (p, J)
value unsigned short 2 0 = none
1 = group 1
2 = group 2
3 = group 3
4 = group 4
(null to query in text)
xCOmPRESS – Compressor Adjust
this command controls/reports the signal compression setting on a Channel. this command can be used to
replace the Compress command for the p group.
Command Form : DEVICE xCOmPRESS <Channel> <group> [value]
Argument Type Size Values units
Channel Channel 1 see groups and Channels
group group 1 23 (J, p)
value unsigned short 2 0 = off
1 = on
2 = toggle
(null to query in text)
xCOmPSEL – Compressor Enable
this command enables signal compression on a Channel. this command can be used to replace the Compsel
command for the p group.
Command Form : DEVICE xCOmPSEL <Channel> <group> [value]
Argument Type Size Values units
Channel Channel 1 see groups and Channels
group group 1 23 (J, p)
value unsigned short 2 0 = off
1 = on
2 = toggle
(null to query in text)
xdELAy – Audio Delay
this command controls/reports signal delay on a Channel. this command can be used to replace the Delay
command for the p group.
Command Form : DEVICE xdELAy <Channel> <group> [value]
Argument Type Size Values units
Channel Channel 1 see groups and Channels
group group 1 5, 23 (p, J)
value unsigned short 2 0.0 – 250.00
(null to query in text) ms