ClearOne comm CONVERGE SR 1212 - Manual (Page 263)

258
PAFLT – PA Fault
this indicates one of the power amplifier channels is in a Fault condition. This is Read-Only, and is
automatically generated if a fault occurs.
Command Form : DEVICE PAEqEN [Bitmap]
Argument Type Size Values
Bitmap hexadecimal Integer 4
PAImPEd – PA Output Impedance
this command selects the output impedance for the pa channel to be either 8 ohms or 70/100v.
Command Form : DEVICE PIAmPEd <Channel> <group> [value]
Argument Type Size Values units
Channel Channel 1 see groups and Channels
group group 1 23 (J)
value unsigned
short 2 0 = 8 ohms
1 = 70/100v
(null to query in text)
PALEN – PA Limiter Enable
this command changes enables the limiter on a power amplifier channel.
Command Form : DEVICE PALEN <Channel> <group> [value]
Argument Type Size Values units
Channel Channel 1 see groups and Channels
group group 1 23 (J)
value unsigned short 2 0 = off
1 = on
2 = toggle
(null to query in text)
PALT – PA Limiter Threshold
this command sets the limiter threshold on a power amplifier channel.
Command Form : DEVICE PALT <Channel> <group> [value]
Argument Type Size Values units
Channel Channel 1 see groups and Channels
group group 1 23 (J)
value signed Float 2 -65.00 to +20.00
(null to query in text) dB