ClearOne comm CONVERGE SR 1212 - Manual (Page 270)

265
RINGEREN – Audible Ring Enable
this command sends/reports the use of an audible ring.
Command Form : DEVICE RINGEREN <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
value unsigned Integer 2 0 = off
1 = on
2 = toggle
(null to query in text)
RINGERLVL – Audible Ring Level
this command selects/reports the audible ring’s level.
Command Form : DEVICE RINGERLVL <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
value signed Float 2 -12.00 – 12.00 (dB)
(null to query in text)
RINGERSEL – Audible Ring Melody Selection
this command sends/reports the audible ring melody.
Command Form : DEVICE RINGERSEL <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
value unsigned Integer 2 1 – 3
(null to query in text)
RINGERTEST – Audible Ring Melody Test
this command plays the current audible ringer melody. This command is executable only. There is no query.
Command Form : DEVICE RINGERTEST <Channel>
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
reserved unsigned Integer 2 0
RINGmOd – Ring Cadence Mode
this command sets the ring cadence to either standard mode or custom mode. the cadence can be set using the
rIngon and rIngoFF commands. the country code should be set first using the Country command.
Command Form : DEVICE RINGmOd <Channel> <group> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)