ClearOne comm CONVERGE SR 1212 - Manual (Page 40)

35
LCd default display
When you power up a Converge/Converge pro unit, the lCD display reads Initializing. If an error occurs, contact
Clearone technical support. When initialization is complete, ClearOne Converge[model Number] appears on
the lCD panel, along with the device type, device ID, device name, Ip address, and firmware revision level as shown
below.
Model
DeviceType, ID, Name
Firmware Level
IP Address
ClearOne
Converge 840T
32: CONVERGE840T-F0
1.0.00
IPA: 192.168.1.2
to access the lCD menu, press the Select button. the Converge menu appears as shown below.
CONVERGE MENU
Channels Settings
Presets Macros
Front Panel Lock
using Console, you can create a pIn code and lock the front panel to prevent unauthorized access to lCD menu
functions. When the lock feature is enabled and the front panel is unlocked, it will automatically re-lock after 3
minutes of inactivity. see the Unit Properties topic for instructions on how to enable the lock feature.
For more information, see the Table of Contents for these related topics:
macros •
Presets •
Controls and Connections •
Console Configuration mode •
mic Input Settings •
Line Input Settings •
Telco Rx Settings •
Telco Tx Settings •
Processing Settings •
Output Settings •
LCd Channels menu •
LCd Settings menu •
LCd macros menu •
LCd Presets menu •
device Ids •
unit Properties •