ClearOne comm CONVERGE SR 1212 - Manual (Page 269)

264
REdIAL – Redial the Last Number
this command redials the last number. There is no query for this command.
Command Form : DEVICE REdIAL <Channel>
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
reserved 2 0
REFSEL – Reference Select for PA Adaptation & AEC
this command selects/reports which output or expansion bus reference is used for a mic input as a reference for
power amp adaptation mode and acoustic echo cancellation where applicable.
Command Form : DEVICE REFSEL <Channel> [ref. group ref. Channel]
Argument Type Size Values units
Channel Channel 1 see 3 (m) in Groups and Channels
group group 1 3 (m)
reference group group 1 2, 8, 20 (a, B, e, h, J, o)
reference Channel Channel 1 see Groups and Channels
(null to query in text)
REFSET – Reference Channel Set Up
this command selects/reports the output the reference channel tracks.
Command Form : DEVICE REFSET <Channel> [reference output]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 20 (B)
value reference output 2 0 = none
see 2 (o) in Groups and Channels
(null to query in text)
RESET – Reset
resets the unit. There is no query for this command.
Command Form : DEVICE RESET
No Arguments
RING – Ring Indication
this command indicates a ringing line. This command is reportable only. It cannot be queried or set.
Command Form : DEVICE RING <Channel><value>
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
value unsigned
Integer 2 0 = ring Cycle ended
1 = ring Cycle started