ClearOne comm CONVERGE SR 1212 - Manual (Page 242)

237
dIAL – DTMF Dialing
this command dials a DtmF sequence or reports back the last sequence dialed.
Command Form : DEVICE dIAL <Channel> [number]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
reserved 2 0
number string 40 1 – 40 Chars of ‘0’ – ‘9’, ‘*’, ‘#’, ‘,’
(null to query last number dialed in text)
dId – Device ID
this command reports the device id. This command is read only except through the front panel.
Command Form : DEVICE dId [value]
Argument Type Size Values units
value unsigned Integer 4 see Type And device Ids
(null sent in text, value returned)
dTmFLVL – DTMF Tone Level
this command selects/reports the DtmF tone level.
Command Form : DEVICE dTmFLVL <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
value signed Float 2 -12.00 – 12.00
(null to query in text) dB
dTONELVL – Dial Tone Level
this command selects/reports the audible dial tone level.
Command Form : DEVICE dTONELVL <Channel> [value]
Argument Type Size Values units
Channel Channel 1 see Groups and Channels
group group 1 17 (r)
value signed Float 2 -12.00 – 12.00
(null to query in text) dB
duPdATE – Download Update
this command reports the status of download updates.
Command Form : DEVICE duPdATE [Channel group status percent Done message]
Argument Type Size Values units
Channel unsigned Integer 1
group unsigned Integer 1
status unsigned Integer 1 (null to query in text)
percent Done unsigned Integer 1
message Char 60
dVER – Command Dictionary Version
this command reports the version of the command dictionary being used by the unit. This command is read
only.
Command Form : DEVICE dVER [value]
Argument Type Size Values units
value unsigned Integer 4 (sent with a null in text)